Germany — planning and installation nationwide
Glass, acoustic and movable partition systems: surveyed, fabricated and installed for commercial interiors.
Fabrication, site and finished partition runs.
Each system is quoted as a package: panels, profiles, doors, seals, fixings and installation.
Single or double-glazed runs, frameless or with a slim profile, for cellular offices and meeting rooms.
Top-hung panel sets that divide a hall or training room and park out of the way when it is opened up again.
Solid double-skin walls where speech privacy governs the layout rather than the sightlines.
A whole floor layout in one scope: solid, glazed and combination walls set out from your plan.
For architects and facility managers who need the detail resolved before the package goes out.
Build-ups are selected per project against the ceiling, floor and acoustic requirement — ask for the system data sheet with your quote.
Panels are cut to the opening we survey on site. Tolerance is taken up in the connection profile, not with a thick bead of silicone.
The glass, the door, the seals and the flanking path at ceiling and raised floor are specified together, because the weakest junction sets the result.
Walls come apart and go back up on a new grid line. Panels are coded in the handover file so a later move is a relocation, not a demolition.
Phased or out-of-hours fitting with dust containment and protected routes, so the rest of the tenancy keeps working.
CAD details, system build-ups, glass and surface schedules issued in a format you can drop straight into the tender set.
Survey, fabrication, delivery and fitting sit with us, so the site has one contact for the partition package instead of three.
A quoted partition package is written as a scope, so there is no argument on site about who supplies what.
Where the boundary sits differently on your project, say so in the enquiry and it is priced that way.
That is what the systems are built for. Panels and profiles are mechanically fixed rather than bonded, and the handover file lists each panel with its size and surface, so a later re-plan reuses the stock instead of skipping it.
It depends on the build-up and, just as much, on the flanking path over the ceiling and under the raised floor. We state the tested system values for the build-up we are offering and detail the junctions that have to be sealed for that value to mean anything on site.
Yes. Send the floor plan and the ceiling and floor build-ups; we return shop drawings and junction details for approval, and fabrication only starts once those are signed off.
Yes — in phases, out of hours or over a weekend, with dust containment and a protected delivery route. The programme is agreed before the first panel arrives on site.
Door leaves, frames, hardware, closers and locking are part of the package and are matched to the wall they sit in, including on acoustic and glazed runs.
A floor plan with the proposed wall lines, the clear height, the ceiling and floor construction, the acoustic requirement if there is one, and the target date for handover.
They surveyed after the screed went down and the glass fitted the opening without packers. The shop drawings came back with the ceiling junction already solved.
We re-planned two floors and reused most of the panels. Having the panel codes in the handover file is what made that possible.
Technical answers, in writing, with build-ups attached. The acoustic detail at the raised floor was raised by them before I asked about it.
Fitting ran over three weekends while the tenancy stayed open. Containment went up on Friday evening and the floor was clear on Monday.
Tell us what you are dividing and we will come back with the questions needed to price it properly.
Thank you. Someone from the planning team will get in touch shortly to go through the project.
This page uses cookies for analytics and advertising measurement only after you give your consent. Learn More